 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STTH8L06 Turbo 2 ultrafast high voltage rectifier Main product characteristics IF(AV) VRRM IR (max) Tj VF (typ) trr (typ) 8A 600 V 200 A 175 C 0.85 V 75 ns K K A A K K TO-220AC STTH8L06D TO-220FPAC STTH8L06FP Features and benefits Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching and conduction losses Package insulation voltage: TO-220AC Ins: 2500 VRMS TO-220FPAC: 2000 VDC A NC K A D2PAK STTH8L06G TO-220AC Insulated STTH8L06DIRG Order codes Part Number STTH8L06D STTH8L06FP STTH8L06G STTH8L06G-TR STTH8L06DIRG Marking STTH8L06D STTH8L06FP STTH8L06G STTH8L06G STTH8L06DI Description The STTH8L06, which is using ST Turbo2 600V technology, is specially suited as boost diode in discontinuous or critical mode power factor corrections. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. Table 1. Symbol VRRM IF(RMS) Repetitive peak reverse voltage RMS forward voltage Absolute ratings (limiting values) Parameter 2PAK Value 600 30 24 Tc = 150 C Tc = 125 C Tc = 135 C tp = 10 ms sinusoidal 120 -65 to 175 -40 to 175 8 Unit V A TO-220AC / TO-220FPAC / D TO-220AC Ins. TO-220AC / D2PAK TO-220FPAC TO-220AC Ins. IF(AV) IFSM Tstg Tj Average forward current = 0.5 A A C C Surge non repetitive forward current Storage temperature range Operating junction temperature range August 2006 Rev 5 1/10 www.st.com 10 Characteristics STTH8L06 1 Table 2. Symbol Characteristics Thermal resistance Parameter TO-220AC / D2PAK / Rth(j-c) Junction to case TO-220FPAC TO-220AC Ins. Value (max) 2.5 5 4 C/W Unit Table 3. Symbol IR Static electrical characteristics Parameter Reverse leakage current Test conditions Tj = 25 C Tj = 150 C Forward voltage drop Tj = 25 C Tj = 150 C VR = VRRM Min Typ Max 8 A 16 200 1.3 IF = 8 A V 0.85 1.05 Unit VF To evaluate the conduction losses use the following equation: P = 0.89 x IF(AV) + 0.022 IF2(RMS) Table 4. Symbol trr tfr VFP Dynamic characteristics Parameter Reverse recovery time Forward recovery time Tj = 25C Forward recovery voltage Tj = 25 C Test conditions IF = 1 A, dIF/dt = -50 A/s VR = 30 V IF = 8 A, dIF/dt = 100 A/s VFR = 1.1 x VFmax IF = 8 A, dIF/dt = 100 A/s Min Typ Max Unit 75 105 150 6 ns ns V Figure 1. P(W) 11 10 9 Conduction losses versus average current = 0.05 = 0.1 = 0.2 = 0.5 Figure 2. IFM(A) 100.0 Forward voltage drop versus forward current Tj=150C (maximum values) =1 8 7 6 5 4 3 2 1 0 0 2 4 6 1.0 10.0 Tj=150C (typical values) Tj=25C (maximum values) T IF(AV)(A) =tp/T 8 tp 0.1 10 0.0 0.5 1.0 VFM(V) 1.5 2.0 2.5 3.0 2/10 STTH8L06 Characteristics Figure 3. Relative variation of thermal Figure 4. impedance junction to case versus pulse duration (TO-220FPAC) Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC, TO-220AC Ins, D2PAK) Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.E-03 1.E-02 1.E-01 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 Zth(j-c)/Rth(j-c) Single pulse T Single pulse 0.2 0.1 T tp(s) =tp/T 1.E+00 tp 1.E+01 tp(s) 1.E-02 1.E-01 0.0 1.E-03 =tp/T tp 1.E+00 Figure 5. IRM(A) 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 20 VR=400V Tj=125C Peak reverse recovery current versus dIF/dt (typical values) Figure 6. trr(ns) 1000 Reverse recovery time versus dIF/dt (typical values) VR=400V Tj=125C IF=2 x IF(AV) 900 800 IF=IF(AV) 700 IF=0.5 x IF(AV) 600 IF=0.25 x IF(AV) 500 400 300 200 IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) dIF/dt(A/s) 40 60 80 100 120 140 160 180 200 100 0 0 20 40 60 dIF/dt(A/s) 80 100 120 140 160 180 200 Figure 7. Qrr(nC) 1000 900 800 700 600 500 400 300 200 100 0 0 20 VR=400V Tj=125C Reverse recovery charges versus dIF/dt (typical values) Figure 8. S factor 2.0 Softness factor versus dIF/dt (typical values) IF2 x IF(AV) VR=400V Tj=125C IF=2 x IF(AV) 1.8 1.6 IF=IF(AV) 1.4 1.2 IF=0.5 x IF(AV) 1.0 0.8 0.6 0.4 dIF/dt(A/s) 40 60 80 100 120 140 160 180 200 0.2 0.0 0 25 50 75 dIF/dt(A/s) 100 125 150 175 200 3/10 Characteristics STTH8L06 Figure 9. Relative variations of dynamic parameters versus junction temperature S factor Figure 10. Transient peak forward voltage versus dIF/dt (typical values) VFP(V) 7 IF=IF(AV) Tj=125C 1.25 1.00 IRM 6 5 4 3 IF 2 x IF(AV) VR=400V Reference: Tj=125C 0.75 QRR 0.50 0.25 2 1 Tj(C) 0.00 25 50 75 100 125 dIF/dt(A/s) 0 0 20 40 60 80 100 120 140 160 180 200 Figure 11. Forward recovery time versus dIF/dt (typical values) tfr(ns) 300 IF=IF(AV) VFR=1.1 x VF max. Tj=125C Figure 12. Junction capacitance versus reverse voltage applied (typical values) C(pF) 1000 F=1MHz VOSC=30mVRMS Tj=25C 250 200 100 150 100 10 50 dIF/dt(A/s) 0 0 20 40 60 80 100 120 140 160 180 200 1 1 10 VR(V) 100 1000 Figure 13. Thermal resistance junction to ambient versus copper surface under tab (epoxy FR4, eCU = 35 m) (D2PAK) Rth(j-a)(C/W) 70 60 50 40 30 20 10 S(Cu)(cm) 0 0 5 10 15 20 25 30 35 40 4/10 STTH8L06 Package information 2 Package information Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.8 Nm (TO-220FPAC) / 0.55 Nm (TO-220AC) Maximum torque value: 1.0 Nm (TO-220FPAC) / 0.70 Nm (TO-220AC) TO-220AC dimensions Dimensions Ref. Millimeters Min. A H2 OI L5 L7 L6 L2 C A Table 5. Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409 Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40 4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00 C D E F F1 G F1 L9 L4 F D H2 L2 L4 16.40 typ. 13.00 2.65 15.25 6.20 3.50 14.00 2.95 15.75 6.60 3.93 0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154 M E L5 L6 G L7 L9 M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 5/10 Package information Table 6. TO-220FPAC Dimensions Dimensions Ref. Millimeters Min. A A H B STTH8L06 Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.195 0.094 0.393 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.205 0.106 0.409 Max. 4.6 2.7 2.75 0.70 1 1.70 5.20 2.7 10.4 4.4 2.5 2.5 0.45 0.75 1.15 4.95 2.4 10 B D E Dia F L6 L2 L3 L5 F1 L4 D L7 F1 G G1 H L2 L3 16 Typ. 28.6 9.8 2.9 15.9 9.00 3.00 30.6 10.6 3.6 16.4 9.30 3.20 0.63 Typ. 1.126 0.386 0.114 0.626 0.354 0.118 1.205 0.417 0.142 0.646 0.366 0.126 F G1 G E L4 L5 L6 L7 Dia. 6/10 STTH8L06 Table 7. TO-220AC (NIns. & Ins. 20-up) Dimensions Package information Dimensions Ref. Millimeters Min. A B OI L F b2 C Inches Min. Typ. Max. 0.625 0.147 Typ. Max. 15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 4.80 6.20 3.75 15.90 0.598 a1 a2 B b1 14.00 0.511 10.40 0.393 0.88 0.024 1.32 0.048 4.60 0.173 0.70 0.019 2.72 0.094 5.40 0.189 6.60 0.244 3.85 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.212 0.259 0.151 A I4 b2 C c2 a1 l2 c1 c2 e a2 M b1 e c1 F OI I4 L l2 M 15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 2.60 2.95 0.104 1.70 0.044 0.102 0.116 0.066 7/10 Package information Table 8. D2PAK Dimensions Dimensions Ref. Millimeters Min. A A E L2 C2 STTH8L06 Inches Min. 0.173 0.098 0.001 0.027 0.045 0.017 0.048 0.352 0.393 0.192 0.590 0.050 0.055 0.094 Max. 0.181 0.106 0.009 0.037 0.067 0.024 0.054 0.368 0.409 0.208 0.624 0.055 0.069 0.126 Max. 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 10.40 5.28 15.85 1.40 1.75 3.20 4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 10.00 4.88 15.00 1.27 1.40 2.40 A1 A2 B D L L3 A1 B2 B G A2 R B2 C C2 C D E G L M * V2 L2 L3 M R V2 * FLAT ZONE NO LESS THAN 2mm 0.40 typ. 0 8 0.016 typ. 0 8 Figure 14. Footprint (dimensions in mm) 16.90 10.30 1.30 5.08 8.90 3.70 8/10 STTH8L06 Ordering information 3 Ordering information Ordering type STTH8L06D STTH8L06G STTH8L066G-TR STTH8L06FP STTH8L06DIRG Marking STTH8L06D STTH8L06G STTH8L06G STTH8L06FP STTH8L06DI Package TO-220AC D PAK D2PAK TO-220FPAC TO-220AC Ins. 2 Weight 1.90 g 1.48 g 1.48 g 1.70 g 1.86 g Base qty 50 50 1000 50 50 Delivery mode Tube Tube Tape and reel Tube Tube 4 Revision history Date Nov-2002 18-Oct-2004 13-Jun-2005 10-Aug-2006 Revision 2A 3 4 5 Last issue TO-220AC Insulated and D2PAK packages added Tj changed from value 175 to range -40 to 175 C - Page1 Reformatted to current standard. Added package insulation voltage data on page 1. Changed order code STTH8L06DI to STTH8L06DIRG. Changes 9/10 STTH8L06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 |
Price & Availability of STTH8L0606
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |